Terms You Should Know:
BBSBulletin Board System. A bbs is much like an internet site where people who want to read messages, chat, download files or play games, are able to log in as a bbs user, with a password and user name. The person who owns the bbs site is called a SysOp (System Operator).Fidonet Compatible BBSA Fidonet compatible bbs system is one which uses one of the many Fidonet compatible message area types in it's message areas. When looking for a bbs program that you can run on your system, if a bbs program uses Fidonet compatible message areas, it will usually say so in the documentation. Some examples of Fidonet compatible message types are Squish, Hudson, Jam, and MSG. You will find these types of message formats in bbs programs such as Maximus, and Mystic bbs. Some bbs software programs use their own proprietary format which are also Fidonet compatible, such as PCBoard, WildCat, and BBBS.NodeA Fidonet node may be a BBS system with users, or an automated system which performs mail -only duties.Node NumberIn Fidonet, each system is given a node number, not unlike an IP address in some respects. This node number will tell you in the first digit followed by colon, where in the world the system is located. 1:, for Zone 1 North America, or 2: for Zone 2 Europe, or 3: for Zone 3 Australia/New Zealand, or 4: Zone 4 South America, 5: for Zone 5 Africa, or 6: for Zone 6 Asia.Network
The next digits, before the "/" in the address, tell you the network within the zone. I am in Zone 1, network 261. My address is 1:261/38, indicating that I am node 38 in network 261 in North America.
The Fidonet nodelist lists my bbs/mailer telephone number, along with some flags to indicate that my system is also reachable via telnet and binkp, and ftp on the internet.
Normally, your network coordinator will assign your node number to you, and also apply the correct flags to your listing, if you let him know about your system capabilities.
All node numbers are listed in the Fidonet nodelist. These node numbers, flags, phone numbers and other information are read by your front-end mailer before your system tries to connect to another system.When you apply for a FidoNet node number, you will be assigned to a network (net) in the region where you operate your BBS. Each network is coordinated by an individual called the NC (Network Coordinator). Your NC is responsible for the smooth operation of your network. You can read policy 4where all the duties of the net coordinator are explained.NodelistThe list of all nodes which exist in FidoNet. Each week you will receive a difference file which should be applied to your current nodelist. The difference file is called a nodediff. Some BBS software programs include a nodelist compiler to apply the difference file to your current nodelist. If your BBS software does not include a nodelist compiler, then you should run a stand-alone nodelist compiler (read more about the nodelist)MailerThe mailer is a program that may run on top of a BBS program, or 'stand-alone' by itself with no BBS program. When it is run on top of a BBS program (called a "front-end"), it is able to determine whether a caller to the system is another BBS mailer, or a user who wants to log onto your BBS system.Region
The mailer is also used to call out to other FidoNet systems, and to allow other bbs systems to call your system. You can use your mailer to call another system to pickup or receive FidoNet traffic (mail, etc.), or to request a particular file (File Request or 'freq.' ). When you use a modem to dial up other fidonet members, you use mailers such as FrontDoor, or Binkley Terminal. Some BBS programs come with a modem capable mailer (BBBS, WildCat WinServer, for example.
If you have an internet connection that you will use to contact other Fidonet members, you can use one of the many available IP mailers, such as BINKD, or InternetRex, or Argus, or any mailer or BBS program that uses the BINKP protocol.Geographic sections of Zone 1 (North America) are divided into sections called Regions.Regional Coordinator
A Regional Coordinator is responsible for the smooth operation of the Region he or she coordinates. See Policy 4 for a list of other duties of an RC.RINA Regional Independant Node is not a member of any network, but is listed under the Regional Coordinator. This may be because there is no local net for the node.UplinkThe system you receive your echomail and file feed from.DownlinkA system who receives files or echomail from you.
HUBA HUB is large system where netmail, echomail and files are distributed from.Routing FileThe Routing file contains a list of how you would like your mail handled as it leaves your system. You can forward all your netmail to your echomail uplink, or your NC in your network, and he or she will make sure that your mail moves on to it's destination. The instructions for this would go in your routing file. Your routing file will depend on the type of software you use for your mailer and/or BBS. Here is an example of routings given a FrontDoor style mailer (this type mailer is called an ArcMail attach Mailer).NetmailThis routing statement tells your mailer to route any netmail traffic you write for sysops in zones 1, 2, 3, 4, 5 or 6 through 1:261/0. Once 1:261/0 gets your mail for Zone 2, for instance, 1:261/0 sends it on to his uplink who then moves the mail to his uplink, until your mail is delivered.Route-to 1:261/0 1:* 2:* 3:* 4:* 5:* 6:*Netmail is a type of message between yourself and another individual in FidoNet, and in that respect it is similar to e-mail. Netmail can only be considered private if it is sent directly to the receiver (your modem -> receiver's modem, or your internet-mailer -> receiver's internet-mailer).CrashMailCrash mail is sent directly from your system to another system immediately after you finish writing it. In order to send Crash mail, your system must have a mailer of one of two types on your system:or
a modem->modem landline mailer an ION (internet only) mailer.
For normal landline (modem to modem) crash mail, you can use mailers such as FrontDoor,Binkley, or T-MAIL, etc. If your system is available only on the internet, you can use one of the internet-style mailers such as BINKD, ARGUS,or IREXwhich use the BINKP protocol.
HoldMail that is put on Hold will stay on your system until the recepient polls for it to pick it up. If you have mail on hold for you one someone elses system, you will need to call that system to pick it up.Direct NetMailDirect NetMail is sent directly from your system to another, without going through any other systems. You normally set an event to send this mail at a particular time of day or night. With Internet technology so prevalent in FidoNet today, the concerns of setting events to send direct mail only during the wee hours of the night when rates are cheap, have essentially disappeared.Routed NetmailRouted Netmail is sent from your system to other systems, called HUBs , who then move your message on to it's destination. Routed Netmail delivery is slower than crash netmail, since it must arrive at each location and be forwarded to the next system before it arrives at its destination.You should also remember that in general you should not attach a file to a netmail message that is being routed to it's destination. This is because unless you have the agreement of every node that your attachment must pass through, your file will most likely be dumped along the way - no one is required to continue an attachment to it destination unless they have agreed to do so.File AttachmentYou may have a great bbs utility, batch file, script or program that you'd like to share with a friend. In that case, you can write your friend a netmail message, and 'attach' that file to the netmail you write. It works the same way an internet e-mail attach works, though in general you should only attach files to message that are going directly to your friends' system. To send a file attachment, generally you address your message to the system who should receive the file, and you normally place the path to your file and the filename on the subject line. Different mailers have different methods of then setting the attach flag on your message. With the FrontDoor Mailer, you press Ctrl+F to set it, with BBBS you include the less-than "<" symbol before the nodelist address.File Request (freq)As mentioned earlier, a file request is used when you know that a certain system has a particular file available for download by mailer. In your netmail message, you address your mail to the system that has the file, and normally you put the name of the file you'd like to request in the subject line. Once connected to the system, your mailer will pass the request to the system you are calling, and the system you are calling will allow your mailer to 'take' a copy of the program. Again, different mailers have different methods of setting the freq bit in your netmail message (marking it as a file request, i.e.). If you are using the FrontDoor Mailer, you press Ctrl+R to select freq, with BBBS, you include the greater-than ">" symbol before the nodelist address.BackboneMail and archives which are distributed in FidoNet may be delivered or picked up from a number of Backbone distribution systems. There are a number of backbone distribution systems in FidoNet, such as the original NAB system, the WWW system, PAB and the Z1B system.Echomail (echo message areas)Like newsgroup articles, an echomail message is a broadcast type message that anyone may reply to, unless the rules of the echo state that the echo is 'read-only'. In that case, you may read the messages in the echomail area, but you may not reply, or post any messages. Echomail message areas are like newsgroups in that anyone may reply to messages in that echo area. When you post a reply to a message in an echo area, your message is transported to all BBS systems which carry that message echo area. Fidonet echos are "post-moderated", in other words, you post a message in an area, and if it's off-topic, the moderator will let you know after you've posted the message. Some Fidonet echos are "read-only", and may not be posted to by normal bbs users or SysOps. The read-only areas are generally administrative areas. The rules of the echo should tell what type echo it is, who may post , and the rules of the echo. The rules of the echo are generally posted in each echo once a month, or you can read all the rules of all the echos in the elist archive.TagEach message echo has a TAG name which identifies that area, such as PDNECHO. This tag name is read by your BBS software when importing echomail. The list of Backbone message echo tag names is located in BACKBONE.NA (NAB backbone), BACKBONE.WW (WW Backbone), BACKBONE.PAB and BACKBONE.Z1B (Z1B Backbone).File EchoA file echo is like a message echo in that a file (generally shareware or freeware software) sent out from one system can be received by anyone who subscribes to that file echo. Like message echos, each file echo also has a unique tag name. The File Echo tag names are listed in a file called FILEGATE.ZXX, which is distributed weekly in the FG_WORF file echo.FDNAn FDN (File Distribution Network) groups files of like interest or category for distribution to members of FidoNet. File echos are distributed by FDN Coordinators, and are freely available to all members of FidoNet from various sites, often called File Hubs, in your net. Each FDN is unique, and deals with one category, or type of file (games are distributed by the Gamesnet FDN), or anti-virus software (Anti-Virus FDN), or programming files (PDN), or files that run under Linux or OS/2). You can see the entire list of file echo areas that are currently available in the filegate.zxx file.TIC s and TICK TechnologyThe File Hub in your net, or the uplink you select to download files from uses TICK technology to distribute archives to your system.TICK technology uses a small file (xxxxxxxx.tic) to describe the archive it accompanies to your system. The xxxxxxxx.tic file has a unique file name, and contains information such as the archive's file name, description of the archive, the crc of the archive, and who has already received the archive (seen-by lines).The tic file looks something like this:Area NODEDIFF
To Joe Delahaye, 1:249/0
Desc Fidonet Nodelist Difference file for week 038
Path 1:261/38 1042351435 SUN JAN 12 12:03:55 2003 UTC +060049 E340 AC
Path 1:261/38 @030112130427 EST+5
Pw PasswordWhen this file is received with archive, NODEDIFF.A38, your file tosser reads the information in the tic. It then looks for the corresponding information it needs in your configuration file. Finally, it move the archive from your inbound to the place on your hard drive where you've chose to store this file area.After the file is placed in your file base by your tick-compatible software , the .tic file is deleted by your system.FileTosserA FileTosser is a program that looks in your mailer's inbound directory for .tic information files and the archive associated with that .tic file. The FileTosser program reads the archive's .tic file and your configuration file, and moves the archive to the place on your hard drive specified in your tic configuration. The tick program also updates the archive's file description on your BBS so your users know the purpose of the file.Point
There are a number of file tossing programs - a number of BBS programs include their own, as a matter of fact. If you BBS software doesn't include one, you can select from the original freeware TICK program, or from any number of shareware programs, like ALLFIX .A point is a bbs user who collects his mail in an archived files that he picks up from a BBS system. Once downloaded, the mail can be read offline. The point saves replies using point software, and drops them off at the BBS system. The point is considered a BBS user, and the SysOp of the BBS (called a Boss node) is responsible for the point's behavior within Fidonet. Points can enjoy most activities in Fidonet that a node can, but generally aren't allow to vote in Network or Regional elections. Points can be moderators of an echo, however, and can coordinate FDN areas.
Door and DoorfilesA door is an online game that is played on a BBS system by the bbs users. Doors use a file called a Doorfile to keep track of which users are playing, their high scores, etc. When a bbs user chooses a game to play, the bbs creates the doorfile on the fly, following a specified format for that type door. Different doors use different types of doorfiles. Some use doorfiles called DORINFO.DEF, some use doorfiles called DOOR.SYS, etc. The documentation for the door you want to put on your bbs should tell you which type of doorfile the game needs your bbs to create when a user wants to play one of the games on your bbs.
Copyright 2003 by Janis Kracht
All rights reserved.